How to make shirt screen printing process manually

Shirt screen printing process manually

In previous articles we have discussed what tools and materials are always in the process of manual screen printing t-shirts . Also we have learned how to design an image using Photoshop applications , CorelDraw , Freehand or any other application that you know . And now see how the screen printing process . ok , will provide manual screen printing stages.

Prepare the following tools

screen printing
chemical light
Hardener ( hardener screen )
The results of the print image ( remember the color should be black )
Screen printing table or board and given a glue table
Rakel (sweeper)
cooking oil (vagetable oil)
Water spray ( bird spray )
Chemical / Paint and Ink / Pigment Colour
table lamp (for cooking the chemical)
Prime card / atm former
Shirt " If you want to know the type of shirt can in " Type of Material Shirt "

Mix a mild chemical emulsion and sensitizernya bowl then stir . Then apply the front and back of the screen using the former prime thin card , as shown below so that spread to the surface and wait until slightly dry .

apply the front and back of the screen using the former prime thin card

If the display surface looks dry, apply a screen front surface with cooking oil and place the print paper , broom with prime cards to print paper attached to the screen . Then put it as a sequence of images below . Turn on the lamp table and wait for 7-10 minutes in a dark room .

apply a screen front surface with cooking oil and place the print paper

If it is about 7-10 minutes , remove the screen and then flush with the first pour water all over the screen so that the oil is gone. Then spray the screen with water spray ( spray birds ) so that the area of ​​the screen that contains the image can be perforated .. Then dry in the sun and wait for it to dry , if it is dry apply a hardener on the screen ( screen hardener ) .

spray the screen with water spray

Now make a paste by mixing paint and ink in a bowl and mix well , you have to adjust the dose to get the desired color . " learn the types of screen printing inks and techniques "

Put plywood into a shirt that had been smeared with glue table , use plywood so that the results obtained during the sweep and paint evenly can be filtered properly .

Put polywood into a shirt that had been smeared with glue table

Put the screen above the shirt then pour the pasta above screen

Pull pasta using Rakel so pasta can descend through a small hole screen object clothes , then dry the paint in dress shirt using a hair dryer and repeat 2-3 times to get a good result .

Pull pasta using rakel

After sweeping finished dry under the scorching sun or when having press machine , press machine used for maximum results .

#hope it is useful